Service eligibility and regional restrictions
PuppyIP serves only compliant overseas businesses and their authorized personnel. Proxy services are not available in mainland China. The service may only be used for lawful business activities outside mainland China. Use of this service within mainland China is prohibited.
Hosting a proxy IP or server overseas does not change these restrictions. The service must not be provided to end users in mainland China through relaying, forwarding, sharing or resale. Before use, read the Terms of Service.
Key Takeaways
- The new defaults apply when you create a connection in the console or through infrastructure as code.
- IKE Phase 1 defaults to IKEv2. Both phases default to AES256-GCM-16, SHA2-384, and DH group 20 for the encryption, integrity, and group settings.
- Compare the parameters your live tunnels negotiate with the options your rebuild template leaves unset.
- For a No Proposal Match error, use tunnel logs to identify the failing phase first.
Find the operations that create a new connection
AWS announced the change on November 18, 2026. A connection already in use keeps its configuration on the effective date. If CloudFormation, CDK, or Terraform plans to replace the connection, or a recovery script creates a new one, creation uses the defaults in effect at that time.
Check whether the template or execution plan will create a VPN connection. A replacement needs a separate compatibility check even when the running tunnel is healthy. Mark each step that creates a VPN resource during disaster recovery, environment rebuilds, or gateway migrations.
Compare Phase 1 and Phase 2 on both sides
AWS lists IKEv2, AES256-GCM-16, SHA2-384, and Diffie-Hellman group 20 as the Phase 1 defaults. Phase 2 also lists AES256-GCM-16, SHA2-384, and group 20 for its encryption, integrity, and DH options. Group 20 is the 384-bit elliptic curve group. Check how your device labels each option and which phase it applies to.
Review the allowed settings and the negotiated settings for both tunnels. GetActiveVpnTunnelStatus takes a connection ID and tunnel outside IP address and reports what an active tunnel negotiated. Then verify that the customer gateway supports the new defaults and that the template declares any settings both tunnels require.
Test both tunnels and the traffic path in a replacement environment
Suppose an older device currently negotiates IKEv1. If the template omits the IKE version, a replacement connection created after the change defaults to IKEv2 only, and the peers may have no shared option. Test IKEv2 on a separate connection if the device can support it. If the device still needs older settings, explicitly configure the options both peers support when creating the connection, within your organization’s policy.
Record whether both tunnels establish, which parameters they negotiate, and whether application traffic reaches its destination prefixes. With dynamic routing, also check the BGP session and route advertisements. If you decide to update existing tunnels, AWS notes that each update causes a brief interruption to that tunnel. Update and verify them one at a time.
Use the logs to identify which proposal failed
If your AWS tunnel logs show No Proposal Match, look at the status of both phases at the same time. If Phase 1 is down, compare the IKE version, encryption, integrity, and DH group. If Phase 1 is established and Phase 2 fails, compare the IPsec settings and the DH group when PFS is enabled, then check the traffic selectors on both sides.
If both phases establish and traffic still fails, check BGP or static routes, advertised prefixes, and route selection on both sides. Record the account, Region, connection, and tunnel identifiers internally so you can repeat the check against the same resources.
Sources
Frequently Asked Questions
Do I need to reconfigure a running VPN on March 1?
Existing connections keep their configuration. Check whether automation might delete and recreate a connection or create an additional recovery connection.
Will the options my old gateway needs disappear?
AWS says you can still select those options explicitly when creating a connection. Choose the options for each phase based on device support and your organization’s policy.
How do I compare allowed algorithms with the values in use?
Tunnel options show what the connection allows. Query each active tunnel by its outside IP address with GetActiveVpnTunnelStatus to see the values it negotiated.