Service eligibility and regional restrictions
PuppyIP serves only compliant overseas businesses and their authorized personnel. Proxy services are not available in mainland China. The service may only be used for lawful business activities outside mainland China. Use of this service within mainland China is prohibited.
Hosting a proxy IP or server overseas does not change these restrictions. The service must not be provided to end users in mainland China through relaying, forwarding, sharing or resale. Before use, read the Terms of Service.
Key Takeaways
- Dedicated IPs assigns an eligible address to the edge endpoint that clients connect to.
- Enter the origin address and port separately under Origin Configuration.
- IP Access Rules are off by default on new TCP/UDP applications. Check the setting on each application.
- Use Spectrum event logs to confirm whether a rule allowed or blocked a connection.
Confirm which addresses your account can use
Spectrum protocol support depends on your Cloudflare plan. Pro and Business support selected protocols; Enterprise supports all TCP and UDP traffic. Cloudflare-provided Spectrum Static IPs require provisioning by the Enterprise account team. If you use BYOIP, confirm that the address is already available to the application in your account.
The dedicated IP is the edge address that clients reach. The origin address is where Cloudflare connects to forward the traffic. Record the client-facing hostname, edge port, and origin port so you can verify each separately.
Choose Dedicated IPs in the dashboard
Open Spectrum for the relevant zone and select Create an Application. Choose the application type, then enter the subdomain and Edge Port. Leave the subdomain blank to use the zone apex. Fill in the origin address and port using the options under Origin Configuration.
Under Edge IP Type, choose Dedicated IPs and select the eligible Static IP or BYOIP address. If the expected address is missing, check the zone, account, and provisioning status. After saving, look up the application's hostname in DNS and confirm it resolves to the intended edge address.
Check TCP/UDP access rules separately
Cloudflare's November 19 announcement says new TCP and UDP applications have IP Access Rules turned off by default, and existing applications retain their settings. The updated configuration documentation also says new applications created through the API default to off if ip_firewall is omitted.
If the application should enforce your IP Access Rules, check the switch under Advanced Options and confirm plan eligibility. Cloudflare lists the ip_firewall API field under Enterprise settings. Spectrum TCP/UDP respects Allow and Block rules for IP addresses, IP ranges, countries, and ASNs.
Verify that the rules actually take effect
From a test client you control, connect to the application hostname and edge port. Note the time, client egress IP, and outcome. Check the Spectrum event log for the corresponding connection. Cloudflare's network analytics view does not show whether these rules allowed or blocked traffic.
If only your monitor reports that the endpoint is unhealthy, check whether it targets the Spectrum application directly and whether the probe's source falls within the allowed range. Cloudflare documents that an allowlist can block these health checks. Use the logs to establish the cause before changing monitoring or access rules.
Sources
Frequently Asked Questions
Should clients use the address selected under Dedicated IPs?
Clients typically connect to the Spectrum application hostname and edge port. Check that DNS resolves that hostname to the intended dedicated edge address. Keep the origin address in Origin Configuration.
Does the new dashboard reset IP Access Rules on existing applications?
Cloudflare says existing applications retain their settings. Check the switch and rules on each new TCP or UDP application.
Does the same switch apply to HTTP and HTTPS applications?
The application switch is specific to TCP/UDP. Cloudflare documents that HTTP and HTTPS applications have no such dashboard switch, and the API rejects ip_firewall: true.