PuppyIP Resource Center
Cloud Operations 5 min Published 2026-11-18

Crusoe Cloud Interconnect: Locations, cross-connect fees and redundancy

Use Crusoe Cloud Interconnect to connect your network privately to a Crusoe Cloud VPC. Confirm the handoff facility and destination VPC region, then check the facility's cabling charges and Crusoe's terms separately. Plan for two facilities for production workloads, since a single interconnect remains a point of failure.

Crusoe Cloud Interconnect Private VPC Dedicated link redundancy

Service eligibility and regional restrictions

PuppyIP serves only compliant overseas businesses and their authorized personnel. Proxy services are not available in mainland China. The service may only be used for lawful business activities outside mainland China. Use of this service within mainland China is prohibited.

Hosting a proxy IP or server overseas does not change these restrictions. The service must not be provided to end users in mainland China through relaying, forwarding, sharing or resale. Before use, read the Terms of Service.

Key Takeaways

  • The point of presence is the facility where fibre is handed off. The VPC region is where traffic lands. Confirm both when you apply.
  • Crusoe marks Atlanta AT1 and New York NY9 as coming soon. Chicago CH2 and London LD5 appear in its ordering table.
  • Crusoe issues the port authorization. You order the cross-connect from the facility operator and pay its recurring fee directly.
  • The default port speeds are 10, 100 and 400 Gbps. If you need full bandwidth after one path fails, size each path for the full rate.

Where does the dedicated connection go?

Crusoe announced Interconnect in its October 7, 2026 changelog. Once your network connects at a Crusoe point of presence, Crusoe carries the traffic to the region hosting your VPC without traversing the public internet. A point of presence, or PoP, is where fibre is handed off. A VPC is a private network in the cloud.

Start with the target VPC and region, then pick a facility your network can reach. If you need access to internet sites or a different public-facing IP address, plan that service separately.

Which facilities can you request?

North American examples include Equinix CH2 in Chicago, DA6 and DA11 in Dallas, and DC6 in Ashburn, Northern Virginia. The European list includes AM7 in Amsterdam, DB3 in Dublin and LD5 in London. AT1 in Atlanta and NY9 in New York are marked coming soon.

Give Crusoe both the facility code and the target VPC when planning a connection. Confirm the port capacity, destination region and delivery timing for your project even if the metro is already listed.

What information should you prepare?

Contact your Crusoe account team or Support. Provide your organization ID, destination VPC, preferred PoP, and your cage, rack and patch panel details at the facility. Name a technical contact who can stay involved through design and commissioning.

Prepare your autonomous system number, or ASN, for BGP routing. Crusoe accepts public or private ASNs. List the IP prefixes you will advertise. Crusoe says they must not overlap the VPC's address ranges. Its follow-up questionnaire collects the remaining facility and BGP details.

Who installs the fibre and who charges for it?

Crusoe first issues a Letter of Authorization and Connecting Facility Assignment, or LOA-CFA, identifying its patch panel port. You then order a cross-connect from the facility operator. The operator runs dedicated fibre between your patch panel and Crusoe's. Pay the operator's recurring fee directly.

The locations guide gives no project total, delivery timeline or SLA. Ask the facility for a cross-connect quote, then confirm the port, destination region and applicable contract terms with Crusoe.

How should a production network plan two paths?

Crusoe recommends ordering two independent interconnects at separate facilities, such as one in Ashburn and one in Chicago. Even if one interconnect contains multiple links, a single failure can affect them together.

Suppose the workload still needs 10 Gbps during a single-path outage. Each path should be able to carry 10 Gbps on its own. Include the failure scenario and required bandwidth in your request, then verify port availability and contract coverage.

Sources

Frequently Asked Questions

Which port speeds are available by default?

Crusoe lists 10, 100 and 400 Gbps. Ask Crusoe about other speeds or custom connectivity.

What if the city I need is missing from the list?

Ask your Crusoe account team about PoPs in development. Confirm capacity and expected delivery for your project before committing to a design or purchase date that depends on that city.