Service eligibility and regional restrictions
PuppyIP serves only compliant overseas businesses and their authorized personnel. Proxy services are not available in mainland China. The service may only be used for lawful business activities outside mainland China. Use of this service within mainland China is prohibited.
Hosting a proxy IP or server overseas does not change these restrictions. The service must not be provided to end users in mainland China through relaying, forwarding, sharing or resale. Before use, read the Terms of Service.
Key Takeaways
- No ICMP reply means only that the Ping request received no reply; it does not prove that a VMess proxy request fails.
- On Windows, route tracing and TCP reachability can provide supporting clues, but a complete VMess HTTPS request determines whether that request works.
- A one-way route trace provides limited path information. It cannot establish the return path, hidden transport, or commercial circuit type.
- If a real Xray/VMess HTTPS request succeeds while ICMP to the same target gets no reply, that confirms one proxy request and one unanswered ICMP probe only. Unless the filtering point is established separately, the ICMP cause remains unknown; this does not imply that the node or network needs changing.
ICMP Ping and a proxy request test different paths
If a Windows VMess node IP does not respond to Ping but v2rayN/Xray can complete a real HTTPS request through the VMess configuration, those results do not conflict. Ping uses ICMP Echo. A proxy request creates a transport connection to the proxy entry, completes protocol negotiation, and requests a destination site. A network or server may allow the proxy service while ignoring ICMP.
Do not label a Ping timeout as a node failure, and do not extend one successful HTTP request to every time, destination, or transport. Record ICMP response, TCP reachability to the proxy entry, client protocol result, and destination page completion separately.
Use route tracing only as limited path evidence
Windows route tracing can show whether some intermediate hops return probe results, but a hop that does not respond or disappears from the trace does not prove that application traffic was dropped. Network devices may filter trace probes, and a trace result may not represent the return path of a connection to the proxy service.
The command below sends route trace probes only. Replace the placeholder with the current node-entry IP or hostname. Output may disclose network structure and should be redacted before sharing. Do not infer a residential, mobile, enterprise, or commercial circuit type from a one-way trace.
Read route trace results to the node entry
powershell$NODE_ENTRY = 'REPLACE_WITH_NODE_ENTRY_HOST_OR_IP'
tracert -d -w 1000 $NODE_ENTRY
Optionally check TCP reachability to the proxy port
If the proxy entry port is available in a local secure configuration, use Test-NetConnection to observe whether Windows can establish TCP to it. This checks only the transport layer; it does not perform VMess negotiation, authentication, or a destination request. An open port does not prove the node configuration is correct.
If TCP fails and Ping receives no reply, these checks have not confirmed a connection. Consider address resolution, routing, egress filtering, and whether the service accepts only certain sources. Do not publish the actual entry address and port together.
Read TCP reachability to the proxy entry
powershell$NODE_ENTRY = 'REPLACE_WITH_NODE_ENTRY_HOST_OR_IP'
$NODE_PORT = 'REPLACE_WITH_NODE_ENTRY_PORT'
Test-NetConnection -ComputerName $NODE_ENTRY -Port $NODE_PORT -InformationLevel Detailed
Use a complete VMess request to confirm application traffic
Make a real HTTPS request through the VMess node selected in v2rayN with the Xray core. Confirm that the page finishes loading and that the active connection corresponds to the same node and destination. The request verifies only that protocol, target, and configuration at that time; it does not cover other protocols, DNS modes, or every app.
If the full request succeeds while ICMP remains silent, you can say that this proxy request completed. If it fails, use the client error to distinguish the entry connection, protocol negotiation, authentication, and destination connection. Do not skip those stages based only on Ping.
Do not infer circuit identity from a one-way trace
A one-way route trace cannot show the server's return path or identify hidden tunnels, NAT, load balancing, or a commercial circuit. ASN or hop ownership is limited network registration information; it does not confirm the circuit type purchased by a customer or the node's actual geographic origin.
For a routing assessment, record the endpoint, time, address family, test destination, and proxy protocol, and use independent evidence. Do not infer a provider, user origin, or network product from ICMP filtering, one trace, or one proxy request.
Version and conclusion limits
With Windows, Xray 26.9.9, and VMess, if a real proxy HTTPS request succeeds while ICMP to the target receives no reply, record these as separate test results. This version combination limits the stated conditions; without additional evidence, the filtering device or setting is unknown, and no node, router, or Windows network change is implied.
If Ping or proxy traffic later changes, repeat the tests with the same destination, protocol, and approximate time. Keep “no ICMP reply” separate from “proxy request succeeded or failed”; one metric does not replace the other.
Sources
Frequently Asked Questions
Does a VMess node that cannot be pinged mean the proxy is unusable?
No. Ping tests ICMP. Verify destination access with a real request through VMess.
Does a timeout in tracert mean the route is broken?
Not necessarily. Intermediate devices may ignore trace probes, and the trace does not show the complete return path.
Does an open TCP port prove VMess negotiation works?
No. TCP only confirms the transport connection. Protocol negotiation and the destination request still need testing.
Can a silent Ping identify the node's circuit type?
No. ICMP and a one-way trace cannot establish a commercial circuit, return path, or actual node origin.