Service eligibility and regional restrictions
PuppyIP serves only compliant overseas businesses and their authorized personnel. Proxy services are not available in mainland China. The service may only be used for lawful business activities outside mainland China. Use of this service within mainland China is prohibited.
Hosting a proxy IP or server overseas does not change these restrictions. The service must not be provided to end users in mainland China through relaying, forwarding, sharing or resale. Before use, read the Terms of Service.
Key Takeaways
- Charging, ADB, and MTP are separate connection functions.
- Confirm ADB authorization, unlock the tablet, and read USB status first.
- Persistent-mode commands apply only to older Android builds that explicitly support them.
- Verify that Windows can open internal storage after reconnecting before calling file access fixed.
Confirm this is a USB-mode issue on an older Android device
When a tablet charges over USB but does not appear in Windows, check its selected USB function and whether Windows enumerates an MTP device. Charging, Android Debug Bridge (ADB), and Media Transfer Protocol (MTP) are separate paths; success on one does not prove the others are ready.
This guide is limited to older Android-based devices already authorized for ADB and exposing the relevant USB service command. It is not supported on every MatePad and must not be generalized to newer HarmonyOS releases. If ADB is not authorized or device help does not list the operation, stop at read-only checks.
Inspect current state before changing Windows drivers
Unlock the tablet and inspect its USB notification or system settings. Confirm File transfer (MTP), not charging only, photo transfer, or another mode. Then check whether Windows lists a portable or MTP device. Seeing the device name does not prove that internal storage is mounted.
If you use ADB, query only a device you own or are authorized to administer. adb devices -l should show device; unauthorized means the tablet has not approved this computer’s debugging key. Do not bypass approval by copying a serial number, skipping the prompt, or resetting trusted debugging state.
Read-only ADB and USB status check
shelladb devices -l
adb -s REPLACE_WITH_AUTHORIZED_DEVICE_ID shell dumpsys usb
Distinguish the current USB function from the reconnect default
Some older Android builds keep the current USB function separate from the function requested after the screen is unlocked. Switching the current connection to MTP may apply only until disconnect. Returning to charging does not alone show MTP is broken; first check whether read-only status exposes a persistent USB-function field.
Available svc usb operations depend on the system build and are not a universal vendor interface. Check the device’s own supported operations before changing a setting; do not copy another model’s setFunctions, system-property writes, or driver-reinstallation steps.
Set the MTP default only when the device explicitly supports it
Only consider the supported setting command when the target is authorized, model and system branch match, and read-only status confirms MTP is missing from the persistent unlocked functions. It changes the requested USB mode after later unlocks or reconnects. It does not copy files and cannot guarantee a healthy Windows driver.
For a one-time transfer, select File transfer manually from the tablet notification. If you cannot confirm persistent behavior, leave it unchanged and check the manufacturer’s guidance for that firmware.
Set persistent MTP for a supported older device
shelladb -s REPLACE_WITH_AUTHORIZED_DEVICE_ID shell svc usb setScreenUnlockedFunctions mtp
Reconnect and verify actual access, with a rollback path
After the change, inspect USB status, safely disconnect the cable, unlock the tablet, and reconnect. In Windows File Explorer, verify that internal storage is accessible. ADB being online or an MTP label appearing is not enough. Treat an unsupported-command response, permission error, or unchanged status as a failed change; do not retry repeatedly or broaden permissions.
To restore the prior USB selection, use an option explicitly exposed in tablet settings or the USB notification. If that firmware saves a previous value, restore it using the manufacturer-supported method for that value. Do not treat a no-argument svc command as a universal reset. Reread status and verify file access before and after rollback.
Sources
Frequently Asked Questions
Why can ADB show device while File Explorer still shows no files?
ADB authorization and MTP file transfer are separate functions. Check the tablet’s selected USB mode, Windows portable-device enumeration, and whether the tablet is unlocked.
Does this command work on every Huawei tablet or HarmonyOS release?
No. It depends on a particular older Android implementation. Use it only when the device itself confirms support.
Does svc usb setFunctions mtp save the mode for the next connection?
Do not assume so. Current and persistent unlocked USB functions may be separate; check device status and firmware support.